Yak Pipes India

These pipes are available with an outer diameter of 1/2NB to 60NB. The ST52 0 Seamless Tube is a mild carbon steel tube, which is extremely reliable and easy to operate. These tubes possess a smooth surface. They have a long service life and are easy to clean and maintain. DIN 1.0570 Seamless Steel Tubes is a cost-effective highly efficient pipe, which can be used in different corrosive media. These tubes are manufactured following all industry standards and are available in different shapes. The DIN2391C Seamless circular tubes are preferred in transporting and supplying fluids over long distances. These tubes are also used in different structural applications. They are very easy to maintain and clean. DIN 1629 ST 52 Plain end seamless steel tubes can be easily be connected to socket-weld connections or in slip-on flanges. These tubes create a 90-degree angle to the tube run, which makes them an ideal option in small diameter piping systems. The DIN 17100 ST 52.3 Welded Tube is produced by joining pieces of steel together. These tubes are available in pipe sizes between 5mm to 1219.2mm. All our products including, the ST52 NBK Steel pipes, can be customized in different shapes and sizes as per your requirements.

The ST52.3 Steel Cold Finished Tube is a low-carbon manganese tube. These tubes possess good impact resistance and can be readily welded. They can suffice in sub-zero temperatures and are available in normalized form. The ST52 S355 Annealed Tube is designed with excellent workability and high ductility. These tubes have low hardness and brittleness but possess good magnetic properties. In the ST52 Hydraulic Tube, the concentration of carbon is low. This grade is a preferred choice in different industries due to its excellent machinability and exceptional dimensional tolerances. The ST52 Honed Cylinder Tube possesses accurate dimensions. The abrasion resistance stones used in polishing them give them enhanced hardness and an excellent finish. ST52 4 Honed Tube can withstand extreme working pressures and temperatures. The tubes from these grades are available in normalized, phosphate finish, and oiled from the interior and exterior. The ST52-3 BK Honed Tube Tube is made with a smooth and precise finish. The surface in these tubes is relieved of any stress, and the tube is annealed to give it better resistance in various applications. Our experienced staff makes use of cutting-edge technology and the best ST52 Steel Material to produce the best products in this grade.

The EN 1.0570 Precision Steel Tube occupies a special place amongst different groups of steel tubes. These tubes are cost-effective and are protected from corrosion and abrasion due to the unique properties of the pipe. The BKA ST52 Tube is available in welded, seamless, and electric resistance tubes. They are available in square, rectangular, circular, hydraulic, and other similar shapes. The ST52 BK DIN 2391 Seamless Precision Steel Tubes are used to carry fluids or gases in commercial and domestic systems. These tubes are available with an outer diameter of 4mm OD to 125mm OD. DIN 2391 ST52 BK+S Seamless Tube has higher tolerances and is produced with strict security checks. These tubes also possess good impact strength. This DIN 2391 ST52 NBK Tube is available in plain, beveled, and threaded tubings end. The standard wire gauge in these pipes is between 10 SWG to 20 SWG. If you have any queries or want to get a quote on our products or the DIN 2391 St52 Pipe, contact us for more information.

S355 is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. It got great weld ability and machinability, let us see more mechanical details of this steel.

S355 is named based on it's minimum yield strength of 355 Mpa (N/mm2), However the yield strength reduces when you go up in thickness above 16 mm for flat products & hollow sections

Here is the table showing reduction in yield strength based on thickness
Up to 16 mm - 355 Mpa
16 mm < t  ≤ 40 mm -  345 Mpa
40 mm < t  ≤ 63 mm -  335 Mpa
63 mm < t  ≤ 80 mm -  325 Mpa
80 mm < t  ≤ 100 mm -  315 Mpa
100 mm < t  ≤ 150 mm -  295 Mpa

S355 ultimate tensile strength ranges also varies based on thickness.
Up to 3 mm - 510 Mpa to 680 Mpa
3 mm < t  ≤ 100 mm -  470 Mpa to 630 Mpa
100 mm < t  ≤ 150 mm -  450 Mpa to 600 Mpa

Density of S355 is 7850 kg/m3 like all other mild steel

Hardness for S355 J2 ranges from 146 HB to 187 HB

S355 Youngs's Modulus is 190 to 210 Gpa, in a conservative design go for 190 Gpa

S355 is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. It got great weld ability and machinability, let us see more mechanical details of this steel.

S355 is named based on it's minimum yield strength of 355 Mpa (N/mm2), However the yield strength reduces when you go up in thickness above 16 mm for flat products & hollow sections

Here is the table showing reduction in yield strength based on thickness
Up to 16 mm - 355 Mpa
16 mm < t  ≤ 40 mm -  345 Mpa
40 mm < t  ≤ 63 mm -  335 Mpa
63 mm < t  ≤ 80 mm -  325 Mpa
80 mm < t  ≤ 100 mm -  315 Mpa
100 mm < t  ≤ 150 mm -  295 Mpa

S355 ultimate tensile strength ranges also varies based on thickness.
Up to 3 mm - 510 Mpa to 680 Mpa
3 mm < t  ≤ 100 mm -  470 Mpa to 630 Mpa
100 mm < t  ≤ 150 mm -  450 Mpa to 600 Mpa

Density of S355 is 7850 kg/m3 like all other mild steel

Hardness for S355 J2 ranges from 146 HB to 187 HB

S355 Youngs's Modulus is 190 to 210 Gpa, in a conservative design go for 190 Gpa

ST52 pipes come under the DIN 2391 specification. The DIN 2391 St52 Pipe is made with a chemical composition of carbon, silicon, manganese, phosphorous, and sulfur. These pipes are very strong and designed with enhanced corrosion resistance properties. DIN 2391 ST52 possesses excellent mechanical properties. They are designed with a tensile strength of minimum 600Mpa and yield strength of minimum 520Mpa. The ST52 Steel Tube can be easily elongated by a minimum of 14% and still possess good workability. They are available in single random, double random, and custom lengths up to 6000mm. ST52 Carbon Steel Pipe is produced with a carbon concentration of above 0.30%. These pipes can be easily formed by both cold and hot-rolling processes in different dimensions. The ST52 Pipe is widely used in oil and gas refineries, food processing, chemical industries, boiler systems, dairy and fluid pipelines, hydraulic systems, and so on. We are the leading ST52 Pipe suppliers in Mumbai. Our goal is to supply high-quality products at the most reasonable rates.

The ST52 Seamless Pipe is produced with the help of a billet to create a hollow shell. These pipes are extremely strong and don’t require welding or seam to join them together. The 1.0570 Steel Smls Pipe can be easily bent or flanged and can easily withstand extreme pressures and temperatures. These pipes are available with an outer diameter of 1/2NB to 60NB. The ST52 0 Seamless Tube is a mild carbon steel tube, which is extremely reliable and easy to operate. These tubes possess a smooth surface. They have a long service life and are easy to clean and maintain. DIN 1.0570 Seamless Steel Tubes is a cost-effective highly efficient pipe, which can be used in different corrosive media. These tubes are manufactured following all industry standards and are available in different shapes. The DIN2391C Seamless circular tubes are preferred in transporting and supplying fluids over long distances. These tubes are also used in different structural applications. They are very easy to maintain and clean. DIN 1629 ST 52 Plain end seamless steel tubes can be easily be connected to socket-weld connections or in slip-on flanges. These tubes create a 90-degree angle to the tube run, which makes them an ideal option in small diameter piping systems. The DIN 17100 ST 52.3 Welded Tube is produced by joining pieces of steel together. These tubes are available in pipe sizes between 5mm to 1219.2mm. All our products including, the ST52 NBK Steel pipes, can be customized in different shapes and sizes as per your requirements.

S355 is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. It got great weld ability and machinability, let us see more mechanical details of this steel. 

ASTM A106 standard specifications

ASTM A106 is the standard specification for seamless carbon steel pipe applied for high temperature services. Dimensions Schedule Range 

Manganese (Mn): 0.27-0.93, 0.29-1.06
Sulfur (S) Max: ≤ 0.035
Phosphorus (P) : ≤ 0.035
Silicon (Si) Min : ≥0.10
Chrome (Cr): ≤ 0.40
Copper (Cu): ≤ 0.40
Molybdenum (Mo): ≤ 0.15
Nickel (Ni): ≤ 0.40
Vanadium (V): ≤ 0.08

                        CHEMICAL REQUIREMENTS ASTM A106 [ GRADE A,B,C ] IN %

(1) For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above the specified maximum will be permitted up to a maximum of 1.35%.

S355 is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. It got great weld ability and machinability, let us see more mechanical details of this steel.

S355 is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. It got great weld ability and machinability, let us see more mechanical details of this steel. S355 Chemical Composition

ASTM a106 grade A has the lowest strength of the three grades but can still be useful for many applications. A106 grade A is useful because many clients will not need a pipe that is that heavy like grade B and C so they will choose grade A because it is affordable but offers excellent quality when dealing with transporting high-temperature gases or fluids. ASTM a106 grade A can be cut or shaped to a client’s request which will be convenient for the client when using the pipe for the application needed. Grade A has the lowest amount of carbon percentage which is usually around 0.25%. This shows how the strength of the pipe is lower than the other grades.

S235J2+N Steel Pipes Standard Specifications

Astm A333 Gr 6 Pipe, Gas Pipes and SA 333 grade 6 Schedule 40 Pipe supplier and exporter in India

Apart from alloy steel, the specification for A333 Grade 6 covers carbon steel pipes. At Aesteiron, we supply A333 Pipe Material in both a seamless and welded manner. This ASTM specified Carbon Steel A333 Grade 6 Seamless Pipes has been designed with the intention of being used in low temperature environments. The carbon based ASTM A333 gr6 Round Pipe can be manufactured by either a seamless or welding process without any addition of a filler metal to be used in the welding operation. According to the specification, all A333 seamless pipe and welded pipes are required to be treated to control their microstructure.

Tests such as impact tests, tensile tests, hydrostatic tests, and non-destructive electric tests are to be conducted on the LTCS ASTM A333 Gr 6 SMLS Pipe in accordance to the requirements of this particular specification. The use of ASME sa333 grade 6 Schedule 40 Pipe should be kept to a maximum temperature of about 570 Degree F. Pre – heating the sa333 gr6 Bevelled End Pipe is neither required nor is a post weld heat treatment for these pipes necessary. Under this specification, All seamless and welded pipes produced from API 5L A333 Gr 6 Material needs to be treated in such a manner that their microstructure can be controlled using any of the following methods i.e. - Normalizing the A333 Grade 60 pipes, Quenched and Tempered or Double Normalizing the  SA333 gr 6 welded pipes following which the pipe is then to be tempered. Contact Aesteiron for a quick quote and learn more about the price for ASTM A333 Grade 6 Pipes. The advantage to choose Astm A333 Grade 6 Pipe Manufacturers is to get 10% lower price compare to stockist and supplier in Mumbai and Prime quality material with Manufacturer test Certificate.

Table Of Content

§  What Is Astm A333 Grade 6?

§  ASTM A333 Grade 6 Pipe Price

§  A333 Gr 6 Pipe Types

§  Astm A333 Grade 6 Pipe Specification

§  ASTM A333 Grade 6 pipe pressure rating

§  List of A333 Pipes & Tubes used in oil & gas industry

§  Astm A333 Grade 6 Pipe Weight Chart

§  Astm A333 Grade 6 Pipe Schedule

§  Astm A333 Grade 6 Vs A106 Grade B

§  Astm A333 Grade 6 Equivalent

§  Astm A333 Grade 6 Pipe Equivalent

§  SA333 gr 6 standards

§  ASTM A333 temperature range

§  A333 Steel mill tolerance

§  ASTM A333 Gr.6 Carbon Steel Pipe Chemical Composition Chart

§  Astm A333 Grade 6 Allowable Stress

§  SA 333 gr 6 Pipe Mechanical Properties Tensile Strength

S355 is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. It got great weld ability and machinability, let us see more mechanical details of this steel.
Chemical Composition

S355 is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. It got great weld ability and machinability, let us see more mechanical details of this steel.

S355 is named based on it's minimum yield strength of 355 Mpa (N/mm2), However the yield strength reduces when you go up in thickness above 16 mm for flat products & hollow sections

Here is the table showing reduction in yield strength based on thickness
Up to 16 mm - 355 Mpa
16 mm < t  ≤ 40 mm -  345 Mpa
40 mm < t  ≤ 63 mm -  335 Mpa
63 mm < t  ≤ 80 mm -  325 Mpa
80 mm < t  ≤ 100 mm -  315 Mpa
100 mm < t  ≤ 150 mm -  295 Mpa

S355 ultimate tensile strength ranges also varies based on thickness.
Up to 3 mm - 510 Mpa to 680 Mpa
3 mm < t  ≤ 100 mm -  470 Mpa to 630 Mpa
100 mm < t  ≤ 150 mm -  450 Mpa to 600 Mpa

Density of S355 is 7850 kg/m3 like all other mild steel

Hardness for S355 J2 ranges from 146 HB to 187 HB

S355 Youngs's Modulus is 190 to 210 Gpa, in a conservative design go for 190 Gpa

Low temperature ASTM A333 GR. 1 Carbon Steel Line Pipe, A333 Gr.1 Welded Pipe, ASME SA333 Grade 1 Schedule 40 Pipe exporter in India

ASTM A333 grade 1 is constructed from carbon-based alloy for low temperature service. The chemical composition of the A333 carbon steel pipe includes – manganese, phosphorus and sulphur. The tensile strength and yield strength for the A333 gr b pipe is variable among its grades. For example, the tensile strength is 380 MPa and yield strength is 205 MPa for grade 1. The tensile strength is 450 MPa and yield strength is 240 MPa for grade 3. While the tensile strength is 415 MPa and yield strength is 240 MPa for ASTM A333 grade 1 pipe schedule. The pipes made from SA333 gr 1 material are meant for low temperature applications. The A333 grade 1 pipe is available in either welded, ERW, CDW, fabricated or seamless type. While producing welded pipes, it is not necessary to add filler metals during the operation. These carbon steel A333 grade 1 pipes are surface treated. The pipe ends of the A333 Gr 1 seamless pipe could be bevelled, plain ended or threaded, depending on the requirement of the buyer.

Some of the surface treatments include a coating or finishing by Oil-dip, Phosphating, Varnish, Passivation or Shot Blasting. They could also be anodized or finished polish. The treatment gives the surface of the A333 gr 1 smls pipe a smooth and flawless appearance. ASTM A333 grade 1 pipe can be conventionally formed, cold-worked and welded. The A333 grade 1 pipe can be hot worked, but they can’t be hot worked below 1500 degrees F. The ASTM A333 grade 1 pipe equivalent pipe is used in the transportation of Chemical, Water and Gas.  SA333 gr1 pipe finds application in building or construction work, where they are used to deliver concrete pumps. We are one of the oldest A333 grade 1 pipe manufacturer.

·         Outer Dimensions (OD): 19.05mm to 114.3mm

·         Wall Thickness: 2.0mm to 14 mm

S355 is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. It got great weld ability and machinability, let us see more mechanical details of this steel.

S355 is named based on it''''''''s minimum yield strength of 355 Mpa (N/mm2), However the yield strength reduces when you go up in thickness above 16 mm for flat products & hollow sections

Here is the table showing reduction in yield strength based on thickness
Up to 16 mm - 355 Mpa
16 mm < t  ≤ 40 mm -  345 Mpa
40 mm < t  ≤ 63 mm -  335 Mpa
63 mm < t  ≤ 80 mm -  325 Mpa
80 mm < t  ≤ 100 mm -  315 Mpa
100 mm < t  ≤ 150 mm -  295 Mpa

S355 ultimate tensile strength ranges also varies based on thickness.
Up to 3 mm - 510 Mpa to 680 Mpa
3 mm < t  ≤ 100 mm -  470 Mpa to 630 Mpa
100 mm < t  ≤ 150 mm -  450 Mpa to 600 Mpa

Density of S355 is 7850 kg/m3 like all other mild steel

Hardness for S355 J2 ranges from 146 HB to 187 HB

S355 Youngs''''''''s Modulus is 190 to 210 Gpa, in a conservative design go for 190 Gpa

Low temperature ASTM A333 GR. 3 Carbon Steel Line Pipe, A333 Gr.3 Welded Pipe, ASME SA333 Grade 3 Schedule 40 Pipe exporter in India.

ASTM A333 grade 3 is constructed from carbon-based alloy for low temperature service. The chemical composition of the A333 carbon steel pipe includes – manganese, phosphorus and sulphur. The tensile strength and yield strength for the A333 gr b pipe is variable among its grades. For example, the tensile strength is 380 MPa and yield strength is 205 MPa for grade 1. The tensile strength is 450 MPa and yield strength is 240 MPa for grade 3. While the tensile strength is 415 MPa and yield strength is 240 MPa for ASTM A333 grade 3 pipe schedule. The pipes made from SA333 gr 3 material are meant for low temperature applications. The A333 grade 3 pipe is available in either welded, ERW, CDW, fabricated or seamless type. While producing welded pipes, it is not necessary to add filler metals during the operation. These carbon steel A333 grade 3 pipes are surface treated. The pipe ends of the A333 Gr 3 seamless pipe could be bevelled, plain ended or threaded, depending on the requirement of the buyer.

Some of the surface treatments include a coating or finishing by Oil-dip, Phosphating, Varnish, Passivation or Shot Blasting. They could also be anodized or finished polish. The treatment gives the surface of the A333 gr 3 smls pipe a smooth and flawless appearance. ASTM A333 grade 3 pipe can be conventionally formed, cold-worked and welded. The A333 grade 3 pipe can be hot worked, but they can’t be hot worked below 1500 degrees F. The ASTM A333 grade 3 pipe equivalent pipe is used in the transportation of Chemical, Water and Gas.  SA333 gr3 pipe finds application in building or construction work, where they are used to deliver concrete pumps. We are one of the oldest A333 grade 3 pipe manufacturer.

·         Outer Dimensions (OD): 19.05mm to 114.3mm

·         Wall Thickness: 2.0mm to 14 mm

·         Length: max 16000mm, or custom

We Yak Pipes India manufacture & stock a wide range of SS 409  Pipes in India. We Produce the best range of SS 409  Pipes used by the finest quality of raw material. These pipes have a longer work life and better durability, and these features making pipes perfect for industrial use. We supply these pipes in various dimensions, shapes, and brands. We maintain ready stock of these SS 409  Pipes. We Yak Pipes India offering well-tested pipes and also provide test certificates to our valuable clients. 

Chemical Compositions of 409 SS  Pipes:

•    C 0.08 max
•   Mn 2.0 max  
•   Si 1.0 max  
•   P 0.045 max  
•   S 0.030 max  
•   Cr 17.00 - 19.00  
•   N  0.10 max  
•   Ni 9.00 - 12.00  
•   Ti 5(C+N) – 0.70 max  

Mechanical Properties of 409 SS  Pipes: 

• Density - 8.0 g/cm3
• Melting Point - 1457 °C (2650 °F)
• Tensile Strength - Psi – 75000 , MPa – 515
• Yield Strength (0.2%Offset) - Psi – 30000 , MPa – 205
• Elongation - 35% 

We Yak Pipes India providing the best range of SS 410 Seamless Pipes to our clients. These SS 410 Seamless Pipes are available in both seamless and welded forms in different sizes and thicknesses. We also provide original laboratory Test Certificates to all clients. This grade of the alloy has a high content of chromium and molybdenum contents which makes it extremely resistant to various types of corrosion.

Usage & Applications of SS 410 Seamless Pipes:

• Constructions 
• Oil & Gas Industries
• Petrochemical Industries
• Cement Industries
• Sugar Industries
• Paper Industries
• Nuclear Power
• Refineries Industries
• Ship-building 
• Steel Plants & Mining Industries.

ASTM A335 P5 Seamless Pipe is one of the commonly used pipes in the refineries. It is also used in other industries. The ASME SA 335 Grade P5 Alloy Steel Pipes are made up of a chromium molybdenum alloy that makes it stronger and corrosion resistant. The ASTM A335 P5 Pipe standards differ. It could be ordered from smaller sizes to larger diameters. The chromium addition of the A335 P5 Chrome Pipe is in the range of 4-6%. The P5 steel pipe material also contains other elements such as Silicon, Manganese and Phosphorus in various quantities. The ASTM a335 gr P5 seamless pipe could either be fully annealed or isothermal annealed. The normalized and tempered conditions are also available. The grade C of the A335 gr P5 alloy pipe can be produced in subcritical annealed condition as well.

The applications of the A335 P5 pipes are seen in in the water treatment, energy, thermal power plants, nuclear power stations and chemical industries. But the primary usage is in the refineries. The addition of nickel and manganese add up to the hardness of the pipes. So these pipes are suitable for high temperature applications. The SA 335 gr P5 alloy steel pipe has different schedules and pressure classes. Depending on the diameters, wall thickness and the makeup procedures, the strength and pressure containment capacities vary. The sa335 P5 seamless pipe has less absolute roughness which makes the dimensions very precise. This feature is useful in applications that are sensitive where calculations have to be precise. The ASTM a335 grade P5 welded pipe can be used in conjunction with the other material made pipes where the application requirements allow. There are other grades of the same A335 such as the P9 and P11 which are used mostly in petrochemical industries.

 ASTM A335 grade P5 Pipe Tensile Strength

S355 is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. It got great weld ability and machinability, let us see more mechanical details of this steel.

• Dimensionally accurate
• Perfect finish
• Easy to fit

S355J2H EN 10210 Tube is made up of a 0.22% carbon included low carbon steel that is ductile, hard, strong and corrosion resistant. The material has silicon, manganese, phosphorus and sulfur in the composition. The combination of elements in the EN 10210 S355J2H Material provides it with 355MPa minimum yield strength and 630MPa minimum tensile strength. The material comes in different sizes, shapes and types.

Astm A333 Gr 6 Pipe, Gas Pipes and SA 333 grade 6 Schedule 40 Pipe supplier and exporter in India

Apart from alloy steel, the specification for A333 Grade 7 covers carbon

ASTM A106 standard specifications

ASTM A106 is the standard specification for seamless carbon steel pipe applied for high temperature services.

Dimensions Schedule Range

The standard covers pipe sizes in NPS (National Standard Straight) from 10.3mm DN6 – 1219mm DN1200 (1/8 inch to 48 inch), complied with ASME B 36.10M. But other sizes out of this B36.10 also could apply the A106 standard.CHEMICAL REQUIREMENTS ASTM A106 [ GRADE A,B,C ] IN % 

Raw materials

ASTM A106 standard raw material is carbon steel, it shall be applicable for bending, flanging or similar forming processes.

Test Methods

The test methods for the ASTM A106 A, B, C are the flattening tests, hydrostatic test, nondestructive electric test, Ultrasonic test, eddy current test, flux leakage test, these test procedures shall be notified or discussed with client to confirm what kind of test will be applied.

Apart from alloy steel, the specification for A333 Grade 6 covers carbon steel pipes. At Aesteiron, we supply A333 Pipe Material in both a seamless and welded manner. This ASTM specified Carbon Steel A333 Grade 6 Seamless Pipes has been designed with the intention of being used in low temperature environments. The carbon based ASTM A333 gr6 Round Pipe can be manufactured by either a seamless or welding process without any addition of a filler metal to be used in the welding operation. According to the specification, all A333 seamless pipe and welded pipes are required to be treated to control their microstructure.

Tests such as impact tests, tensile tests, hydrostatic tests, and non-destructive electric tests are to be conducted on the LTCS ASTM A333 Gr 6 SMLS Pipe in accordance to the requirements of this particular specification. The use of ASME sa333 grade 6 Schedule 40 Pipe should be kept to a maximum temperature of about 570 Degree F. Pre – heating the sa333 gr6 Bevelled End Pipe is neither required nor is a post weld heat treatment for these pipes necessary. Under this specification, All seamless and welded pipes produced from API 5L A333 Gr 6 Material needs to be treated in such a manner that their microstructure can be controlled using any of the following methods i.e. - Normalizing the A333 Grade 60 pipes, Quenched and Tempered or Double Normalizing the  SA333 gr 6 welded pipes following which the pipe is then to be tempered. Contact Aesteiron for a quick quote and learn more about the price for ASTM A333 Grade 6 Pipes. The advantage to choose Astm A333 Grade 6 Pipe Manufacturers is to get 10% lower price compare to stockist and supplier in Mumbai and Prime quality material with Manufacturer test Certificate.

Table Of Content

§  What Is Astm A333 Grade 6?

§  ASTM A333 Grade 6 Pipe Price

§  A333 Gr 6 Pipe Types

§  Astm A333 Grade 6 Pipe Specification

§  ASTM A333 Grade 6 pipe pressure rating

§  List of A333 Pipes & Tubes used in oil & gas industry

§  Astm A333 Grade 6 Pipe Weight Chart

§  Astm A333 Grade 6 Pipe Schedule

§  Astm A333 Grade 6 Vs A106 Grade B

§  Astm A333 Grade 6 Equivalent

§  Astm A333 Grade 6 Pipe Equivalent

§  SA333 gr 6 standards

§  ASTM A333 temperature range

§  A333 Steel mill tolerance

§  ASTM A333 Gr.6 Carbon Steel Pipe Chemical Composition Chart

§  Astm A333 Grade 6 Allowable Stress

Apart from alloy steel, the specification for A333 Grade 6 covers carbon steel pipes. At Aesteiron, we supply A333 Pipe Material in both a seamless and welded manner. This ASTM specified Carbon Steel A333 Grade 6 Seamless Pipes has been designed with the intention of being used in low temperature environments. The carbon based ASTM A333 gr6 Round Pipe can be manufactured by either a seamless or welding process without any addition of a filler metal to be used in the welding operation. According to the specification, all A333 seamless pipe and welded pipes are required to be treated to control their microstructure.

Tests such as impact tests, tensile tests, hydrostatic tests, and non-destructive electric tests are to be conducted on the LTCS ASTM A333 Gr 6 SMLS Pipe in accordance to the requirements of this particular specification. The use of ASME sa333 grade 6 Schedule 40 Pipe should be kept to a maximum temperature of about 570 Degree F. Pre – heating the sa333 gr6 Bevelled End Pipe is neither required nor is a post weld heat treatment for these pipes necessary. Under this specification, All seamless and welded pipes produced from API 5L A333 Gr 6 Material needs to be treated in such a manner that their microstructure can be controlled using any of the following methods i.e. - Normalizing the A333 Grade 60 pipes, Quenched and Tempered or Double Normalizing the  SA333 gr 6 welded pipes following which the pipe is then to be tempered. Contact Aesteiron for a quick quote and learn more about the price for ASTM A333 Grade 6 Pipes. The advantage to choose Astm A333 Grade 6 Pipe Manufacturers is to get 10% lower price compare to stockist and supplier in Mumbai and Prime quality material with Manufacturer test Certificate.

Table Of Content

§  What Is Astm A333 Grade 6?

§  ASTM A333 Grade 6 Pipe Price

§  A333 Gr 6 Pipe Types

§  Astm A333 Grade 6 Pipe Specification

§  ASTM A333 Grade 6 pipe pressure rating

§  List of A333 Pipes & Tubes used in oil & gas industry

§  Astm A333 Grade 6 Pipe Weight Chart

§  Astm A333 Grade 6 Pipe Schedule

§  Astm A333 Grade 6 Vs A106 Grade B

§  Astm A333 Grade 6 Equivalent

§  Astm A333 Grade 6 Pipe Equivalent

§  SA333 gr 6 standards

§  ASTM A333 temperature range

§  A333 Steel mill tolerance

§  ASTM A333 Gr.6 Carbon Steel Pipe Chemical Composition Chart

§  Astm A333 Grade 6 Allowable Stress

Chemical Composition:

ASTM a53 gr. A a has the lowest strength of the three grades but can still be useful for many applications. A106 grade a is useful because many clients will not need a pipe that is that heavy like grade b and c so they will choose grade a because it is affordable but offers excellent quality when dealing with transporting high-temperature gases or fluids. Astm a106 / astm a53 gr. A grade a can be cut or shaped to a client’s request which will be convenient for the client when using the pipe for the application needed. Grade a has the lowest amount of carbon percentage which is usually around 0. 25%. This shows how the strength of the pipe is lower than the other grades.

chemical requirements astm a106 / astm a53 gr. A  [ grade a ] in %

mechanical properties

Using the formula given below, you can calculate the Pipe Inside Diameter (ID) with the help of the Outside Diameter (OD) and Thickness of the pipe.

Pipe ID = [Pipe O.D. – (2×Pipe wall thickness)]

ASTM A106 standard specifications

ASTM A106 is the standard specification for seamless carbon steel pipe applied for high temperature services.

CHEMICAL REQUIREMENTS ASTM A106 [ GRADE A,B,C ] IN %

(1) For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above the specified maximum will be permitted up to a maximum of 1.35%.

(2)Unless otherwise specified by the purchaser, for each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above the specified maximum will be permitted up to a maximum of 1.65%.

(3) These five elements combined shall not exceed 1%.

ASTM A333 grade 1 is constructed from carbon-based alloy for low temperature service. The chemical composition of the A333 carbon steel pipe includes – manganese, phosphorus and sulphur. The tensile strength and yield strength for the A333 gr b pipe is variable among its grades. For example, the tensile strength is 380 MPa and yield strength is 205 MPa for grade 1. The tensile strength is 450 MPa and yield strength is 240 MPa for grade 3. While the tensile strength is 415 MPa and yield strength is 240 MPa for ASTM A333 grade 1 pipe schedule. The pipes made from SA333 gr 1 material are meant for low temperature applications. The A333 grade 1 pipe is available in either welded, ERW, CDW, fabricated or seamless type. While producing welded pipes, it is not necessary to add filler metals during the operation. These carbon steel A333 grade 1 pipes are surface treated. The pipe ends of the A333 Gr 1 seamless pipe could be bevelled, plain ended or threaded, depending on the requirement of the buyer.

Astm A333 Gr 6 Pipe, Gas Pipes and SA 333 grade 6 Schedule 40 Pipe supplier and exporter in IndiaApart from alloy steel, the specification for A333 Grade 6 covers carbon steel pipes. At Aesteiron, we supply A333 Pipe Material in both a seamless and welded manner. This ASTM specified Carbon Steel A333 Grade 6 Seamless Pipes has been designed with the intention of being used in low temperature environments. The carbon based ASTM A333 gr6 Round Pipe can be manufactured by either a seamless or welding process without any addition of a filler metal to be used in the welding operation. According to the specification, all A333 seamless pipe and welded pipes are required to be treated to control their microstructure.

CDW  Pipes its also called Cold Drawn Welded Pipes. CDW Pipes made by  Pipes.  Pipes have a joint in their cross-section, and CDW does not have any joint in its cross-section. These pipes have tight tolerance & tight section properties as well. Cold Drawn Welded Pipes are mostly used in automotive industries. We supply the best range of Cold Drawn Welded Pipes to our valuable clients.

Features of CDW Pipes:

• Process-related smooth surfaces
• Good concentricity
• Good concentricity
• Good concentricity
• High level of dimensional accuracy for the internal and external diameter